and heres the pic...
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| to reinforce or not to reinforce...? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5289 |
Page 1 of 1 |
| Author: | vachterm [ Fri Feb 24, 2006 9:07 am ] |
| Post subject: | |
Hey guys/gals! just a quickie, got a really nice bocote set i got from bruce dickey a while back. sides are bent, back is joined and thcknessed and, well, i also inlayed two purfling strips along the back(see pic). they dont go to deep...id say a still got around 1.5-2 mm of wood left there. think i should put any reinforcements on the inside or not? thanks, Udi. |
|
| Author: | vachterm [ Fri Feb 24, 2006 9:08 am ] |
| Post subject: | |
|
and heres the pic... |
|
| Author: | Michael Dale Payne [ Fri Feb 24, 2006 9:12 am ] |
| Post subject: | |
Insurance baby!! aginst the people you have no control over. If you use Spruce the weight is null the strenght gain is huge |
|
| Author: | peterm [ Sun Feb 26, 2006 5:05 am ] |
| Post subject: | |
I would say: Reinforce it! Better safe than sorry! 
BTW....beautifull wood 
|
|
| Author: | John Mayes [ Sun Feb 26, 2006 7:09 am ] |
| Post subject: | |
For sure reinforce! Cheap solid and easy protection. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|